Single column hydraulic press
Using built-in fast cylinder, the idle stroke speed is fast; the convenient manual adjustment machine can adjust the indenter or the upper worktable to press at any position in the stroke, and the length of the fast forward and working stroke can be adjusted arbitrarily within the design stroke.
Details
Performance and features:
★Using built-in fast cylinder, fast idle stroke speed and high production efficiency;
★Convenient hand-adjusting machinery can adjust the indenter or the upper worktable to press at any position in the stroke, and can also adjust the length of the fast forward and working stroke within the design stroke;
★Pressure can be steplessly adjusted according to process requirements;
★The solid open structure welded as a whole keeps the body rigid enough while having the most convenient operating space.
Parameter
Model parameters:
Nominal pressure 1000KN
Maximum working pressure of liquid 25Mpa
Maximum stroke of slider 600mm
The maximum distance between the lower plane of the slider and the table surface is 800mm
Throat depth 400mm
Slide speed 100mm/s down without load
Working 10-12mm/s
Return stroke 100mm/s
The effective area of the worktable is about 800mm
Front and rear 00mm
The height of the worktable from the ground is 800mm
Motor power 7.5kw
